Description: HomePaymentShippingReturn PolicyAbout UsContact UsFeedbackPiston Diesel Cylinder Liner Puller PT-6400-C Fits Mack Cummins CAT Volvo etcItem Description:100% quality assurance tested, more responsive, less expensive, easier to install.Designed to be used with an impact wrench (not included) for quick cylinder liner removal.The structure is precise and stable, and its power is evenly distributed and will not cause damage to your cylinder liner.Spring-loaded feet design can automatically adjust the puller to fit the liner.7 holes in the lower leg that you can adjust the length of the rod according to the depth of the cylinder.Made of high-quality iron with high hardness, it can withstand abrasion, impact, and corrosion, extending its service life.Installation Steps:How to remove the cylinder liner with the tool?1.Rotate engine to upright position. (Note: universal liner puller must be initially adjusted to fit length of liner.)2.Adjust tool lifting bolt to allow for lifting of puller legs.3.Place tool over liner with tool legs engaged with bottom of liner.4.Turn lifting bolt and withdraw liner from block.5.Tag liner by cylinder position.6.Remove puller from liner.7.Remove and discard crevice seal and two o-rings.Causes of car cylinder liner failure:Faulty spark plugs.Corrosion of cylinder components.Bad ignition coil.Poor lubricationBad fuel injector.Symptoms of car cylinder liner failure:Loss of power.Engine misfire.Reduced fuel efficiency.Engine overheating.Loud engine noise.Check engine light turns on. Fitment:For Universal fitment, order berfore check size info below:Cylinder bore diameter | 3-7/8" to 6-1/4";Liner wall thickness | 0.273" min;Sleeve depth | Up to 15".Tool can be used in:For Mack, Volvo, International Truck;For Detroit Diesel, Cummins(as3376015, except L10 and C series), Navistar and and other engines.Replce for Porta-Tool OE tool number | PT-6400-C.Replce for Maxxforce Tool DT, DT360, DTA360, DTA466, DT466, DT530 (PLN), DT466E, DT530E, DT570, HT570.Replace for CAT Engines 3176, 3196, 3300 Series, 3400 Series, 3500 Series, C10, C12, C15, C16. Material & Color:Material: Made of iron.Color: as picture. Package Included:1x Cylinder Liner Puller(100% Brand New Never Used Or Installed). Note:Provide Tracking Number With Every Order, Please Buy With Confidence!No installation guides are included, we highly recommend to seek professional installation. Any damage during installation will not be refunded.Will come with everything you see in the picture. Please allow difference due to manual measurement.Please check that the picture matches before purchase. The color of the actual items may slightly different from the listing images due to different computer screen, thanks for your understanding.For any inquiries or special requests such as larger amount ordering please write to us.PaymentShipping HandlingSales TaxesReturn PolicyContact usPayment We accept PayPal only. Please be sure your shipping address is correct.We will only follow your address listed at the PayPal payment for the shipment. Unpaid item (UPI) complaint will be filed against non-paying buyers after 4 days.Shipping HandlingItems will ship out within 3 business days after payment is received.All items are shipped by UPS/USPS/FEDEX with a tracking number.Tracking number will be added to ebay after the shipment, customers can track the item status on 17 track net.The Approx delivery time is referred as below, It's usually delivered within 2-8 business days, If it takes longer than this time, please contact us and we will explain the reason and deal with it. Thank you for your understanding Above time are for reference ONLY. Shipping might be delay by holidays, events and other uncertainties such as custom inspect. Sales Taxes Import duties,taxes and charges are not included in the item pricePlease check with your country customs office for these additional charges (Usually we'll lower the value and mark the item as gift)Return PolicyPlease contact us before leaving neutral or negative feedback and we will try our best to resolve any issue.Feedback will be left to every buyer who completed the transaction and left positive feedback to us. Note:Communication is the best way to solve the problem. If you have any problems after purchasing, please contact us in time, before opening return or case. We accept 30 days return only if item is original. Refund will be issued once we receive your returned items.● If you need return, please contact our customer service representative, let us know the detailed problem.● Select from the following 5 reasons.* The reason you pick has no impact on you or your refund amount, but it has a big impact on us as a seller. Other selected reasons may delay the refund process per an internal investigation and appeal to eBay.1) Doesn't Fit2) Changed My Mind3) Found a Better Price4) Just Didn't Like it5) Ordered by Mistake Contact usPlease send all correspondence through the eBay messaging system.All eBay message will be replied within 24 hours of receipt or sooner. Our business time is Monday - Friday 9:30 am to 6:30 pm HKT except all Holidays.You May Also Like
Price: 115.9 USD
Location: Rancho Cucamonga, California
End Time: 2024-08-31T00:00:24.000Z
Shipping Cost: N/A USD
Product Images
Item Specifics
Return shipping will be paid by: Seller
Returns Accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Return policy details:
Manufacturer Part Number: PSS04
Brand: CARLOR
Type: Cylinder Liner Puller
Warranty: 1 Year
OE Number: PT-6400-C/ M50010-B/ 3376015