POWERSOFT K10 POWER AMPLIFIER DSP NEW

Description: STILL UNDER WARRANTY. YOU`RE BIDDING ON A NEW POWERSOFT K10 DSP THE ONLY HOURS ON THE AMPLIFIER ARE THE HOURS BURNED IN BY POWERSOFT. THEY WERE BACK UPS THAT WAS NEVER USED. NEW, STILL IN THE BOX. COMES WITH POWER CABLE, NO PLUG ON THE END. LOCAL PICK UP WELCOME.FEEL FREE TO ASK QUESTIONS. US SALES ONLY. HAVE A BLESS DAY. OverviewThe K10 is nothing short of power with 12,000 W from a single rack space chassis. Capable of driving subwoofers and large-scale FOH systems equally well, numerous touring sound reinforcement systems are built around racks exclusively utilizing K10′s for all frequency bands, benefitting greatly from maximum flexibility. Operation with 2Ω loads is not only safely possible but recommended, reducing the number of amplifiers required in a system.In use worldwide by leading touring and event sound companies, K Series is preferred among the top ranking system designers, sound engineers, and system techs on the road for making their lives easier, giving them reliable premier-grade power and headroom in the smallest possible package size.Fully digitally controlled and with a serial PC communication port as standard, the K10 is also available with KDSP board and KAESOP Ethernet/AES3 interface: the K10 DSP+AESOP amounts to a fully integrated, highly sophisticated yet easy to use power source including state-of-the-art sound shaping and system management capabilities, remotely controllable via Powersoft’s ArmoníaPlus (Interface available for MediaMatrix, Crestron, AMX, Q-SYS control, and monitoring systems).Power supplyAdvanced switch-mode worldwide operating power supply technology for high performance and compact sizePower Factor Correction PFC for extremely low mains consumption and extremely wide mains operating rangeLow Inrush Limiting reduces AC inrush current, removing the need for expensive power sequencersProtectionsFully protected circuit design with:Ac protection: shut down power supply when AC mains voltage is outside the operating rangeClip limiter: prevents severely clipped waveforms from reaching loudspeakers, while still maintaining full peak power outputDC protection: protects against infrasonic signal at the outputsVHF protections: protects the loudspeakers against non-audible, strong, non-musical high-frequency signalsShort circuit protection: protects the amplifier from short circuit or other stressful events for the output circuits with automatic protection resetLong term limiter: protects the loudspeaker against steady long term RMS (non-audio) signals reducing maximum outputThermal protection: output stages operating temperature up to 80 °C (176 °F)Temperature controlled continuous variable speed fan, front to back airflowTemperature forecast with LCD traced historical behaviorGeneralFixed frequency switchmode output stage for high-grade sound accuracyCompact size – all models only 1 RU for reduced rack cost and spaceLightweight – for easier racking and shipping: 12 kg (26.5 lbs) according to the configurationCombo XLR/6.3mm jack Neutrik input connectors with link capabilityAES3 digital inputSettingsLCD matrix interactive displayComprehensive-user friendly front panel display menuBuilt-in defeatable clip limiters for each channelDigital gain-attenuator controlDefeatable gate selection for each channelUser-selectable gain/sensitivityUser-selectable maximum output power for each channelUser-selectable maximum mains current drawLockable set-up by user selectable access key codeBuilt-in remote control via the RS-485 interface provides full diagnostic, operational setting, and system monitoringMonitoringHardware monitor available for fast local diagnosticLoad impedance measurement/display for each channelOutput power measurements/display for each channelMains voltage and current measurements/displayDownloadable log file of functional fault events with time-related traceSmart Card settings, parameters and upgrades functionalityDigital Signal ProcessingAnalog Devices SHARC® DSP architectureAD/DA converter: dual 24bit @ 96 kHz Tandem® architecture, 127 dB dynamic range, per channelInput/output independent equalizers per channel providing PEQ, raised cosine, shelving IIR filters as well as custom output FIR filtersDelay up to 1 s for time alignmentActive DampingControl™ for cable compensationPower limiter (TruePower™, RMS voltage, RMS current) + Peak LimiterRemote managementControl and monitoring through ArmoníaPlusInterface available for MediaMatrix, Crestron, AMXcontrol, Q-SYS and monitoring systems.SPECIFICATIONSGENERALOutput power per channelOutput power per channel6000 W @ 2 Ω4000 W @ 4 Ω2000 W @ 8 ΩBridge mode12000 W @ 4 Ω8000 W @ 8 ΩMax output voltage / currentSingle channel mode200 Vpeak / 125 ApeakBridge mode400 VpeakAC MAIN POWERPower supplyUniversal, regulated switch mode with PFC (Power Factor Correction)Nominal power requirement100-240 V ±10%, 50-60 HzOperating voltage90 V – 264 VPower consumption / current drawIdle115 V: 91 W – 1.3 A230 V: 88 W – 1.17 A1/8 of max output power @ 4 Ω115 V: 1250 W – 12.2 A230 V: 1250 W – 6.1 A1/4 of max output power @ 4 Ω115 V: 2500 W – 22.6 A230 V: 2500 W – 11.3 ATHERMALOperating temperature range0° – 45° C – 32° – 113° FThermal dissipation*Idle115 V: 546 BTU/h – 13.7 kcal/h230 V: 546 BTU/h – 13.7 kcal/h1/8 of max output power @ 4 Ω115 V: 1244 BTU/h – 313.5 kcal/h230 V: 1244 BTU/h – 313.5 kcal/h1/4 of max output power @ 4 Ω115 V: 1943 BTU/h – 489.6 kcal/h230 V: 1943 BTU/h – 489.6 kcal/h

Price: 3600 USD

Location: Bayonne, New Jersey

End Time: 2024-08-23T22:55:05.000Z

Shipping Cost: 0 USD