Eppendorf

Pre-cut malt Moltoprene replacement kit for Mamiya Press 6x7 / 6x9 film holders

Description: Pre-cut malt Moltoprene replacement kit for Mamiya Press 6x7 / 6x9 film holders [From Japan] 【Description】 Pre-cut malt replacement kit for Mamiya Press 6x7 / 6x9 film holders Mamiya Press 6x7 / 6x9 Back cover malt (light-shielding sponge) replacement kit for film holders. If the malt on the back cover and mirror holder is worn out or sticky, you can easily replace the malt with this pre-cut malt kit. You can use it with confidence because there is no light leakage and rattling of the back cover. In the case of a straight malt, twisting occurs because the bent part is forcibly bent, but since the bent part of the groove is also laser-cut according to the shape, naturally no twist occurs. Contains 2 sets (for 2 film bags). 1. Peel off the old malt with the attached bamboo skewer to clean it. 2. Soak alcohol or benzine in a cotton swab and rub it to remove dirt from the area to be applied. 3. Remove the new malt from the mount. 4. Apply alcohol or water to the adhesive surface. While the adhesive surface is moistened with alcohol or water, the adhesive strength of the tape will temporarily decrease, making it easier to align and reattach. 5. Place the malt roughly aligned on the groove. 6. Use a flat-blade screwdriver or a flat-tipped bamboo skewer to push the malt in so that it does not roll. Before the alcohol or water dries, re-pasting will work, so please work calmly. Please do not hesitate to send me a message if you have any other questions. Note: * If customs duties or other tax are needed, buyers have to pay it. Please check customs duties or other tax before purchase. * We cannot declare a shipping label at a price lower than the selling price or as a gift. * We basically sell Japanese products. Please confirm in advance that most of the products are Japanese versions. And japanese electric appliances are mainly 100V. Before purchasing, be sure to check if a transformer is required in your country. * If you have any questions, please be sure to send us a message before you buy. 【Shipping】 It is possible to select the shipping method from three methods. The delivery time is a rough estimate. Please understand in advance that delivery may be delayed. ● Economy Shipping It will be shipped by Post office with a tracking number. Delivery usually takes about one month. ● Standard Shipping It will be shipped by Post office with a tracking number. Delivery is usually 1 to 2 weeks. In some cases it will be shipped by DHL or FedEx. ● Expedited Shipping It will be shipped by DHL or FedEx with a tracking number. Delivery usually takes less than a week. If you want to specify the shipping method, please be sure to send a message in advance. We usually ship within 2 to 5 days, but it may take 1 week to 10 days for business trips. Thank you very much.

Price: 67.99 USD

Location: Nagoyashi Aichi

End Time: 2024-12-18T21:37:30.000Z

Shipping Cost: 0 USD

Product Images

Pre-cut malt Moltoprene replacement kit for Mamiya Press 6x7 / 6x9 film holdersPre-cut malt Moltoprene replacement kit for Mamiya Press 6x7 / 6x9 film holdersPre-cut malt Moltoprene replacement kit for Mamiya Press 6x7 / 6x9 film holdersPre-cut malt Moltoprene replacement kit for Mamiya Press 6x7 / 6x9 film holdersPre-cut malt Moltoprene replacement kit for Mamiya Press 6x7 / 6x9 film holdersPre-cut malt Moltoprene replacement kit for Mamiya Press 6x7 / 6x9 film holdersPre-cut malt Moltoprene replacement kit for Mamiya Press 6x7 / 6x9 film holdersPre-cut malt Moltoprene replacement kit for Mamiya Press 6x7 / 6x9 film holdersPre-cut malt Moltoprene replacement kit for Mamiya Press 6x7 / 6x9 film holdersPre-cut malt Moltoprene replacement kit for Mamiya Press 6x7 / 6x9 film holdersPre-cut malt Moltoprene replacement kit for Mamiya Press 6x7 / 6x9 film holdersPre-cut malt Moltoprene replacement kit for Mamiya Press 6x7 / 6x9 film holders

Item Specifics

Return shipping will be paid by: Buyer

All returns accepted: Returns Accepted

Item must be returned within: 30 Days

Refund will be given as: Money Back

Return policy details:

Compatible Brand: Mamiya

Type: Tool Kit

Brand: Anchor LLC

MPN: Does not apply

Recommended

Anchor Flange, Sr Smith, Aluminum, Pool Slide
Anchor Flange, Sr Smith, Aluminum, Pool Slide

$60.84

View Details
SR SMITH LLC SSR69209200 SRSMITH ANCHOR KIT W/(2) AS-100P
SR SMITH LLC SSR69209200 SRSMITH ANCHOR KIT W/(2) AS-100P

$177.72

View Details
Concepts in Time TRINKET VANITY TRAYS Set of 2 Gold Anchors Blue Wht Stripe NEW
Concepts in Time TRINKET VANITY TRAYS Set of 2 Gold Anchors Blue Wht Stripe NEW

$10.99

View Details
Arrow Shed AK100 Concrete Anchor Kit- New Sealed
Arrow Shed AK100 Concrete Anchor Kit- New Sealed

$24.99

View Details
Anchor Me: Laying a Foundation in Bible Study and Prayer
Anchor Me: Laying a Foundation in Bible Study and Prayer

$17.96

View Details
Campbell T9641035 Steel Galvanized 3.25 ton Capacity Anchor Shackle 5/8 in.
Campbell T9641035 Steel Galvanized 3.25 ton Capacity Anchor Shackle 5/8 in.

$10.00

View Details
Domestic Goddess Red
Domestic Goddess Red

$32.26

View Details
New Anchor LLC Light Seal Replacement Kit for Olympus XA XA2 XA4 Pre-cut 3 sets
New Anchor LLC Light Seal Replacement Kit for Olympus XA XA2 XA4 Pre-cut 3 sets

$16.62

View Details
Outsunny 4-Pack Canopy Party Gazebo/Pop Up Sandbag Anchor for Stability & Safety
Outsunny 4-Pack Canopy Party Gazebo/Pop Up Sandbag Anchor for Stability & Safety

$36.99

View Details
Campbell T9600435 Steel 400 lbs. Capacity Anchor Shackle 1/4 in. (Pack of 10)
Campbell T9600435 Steel 400 lbs. Capacity Anchor Shackle 1/4 in. (Pack of 10)

$19.33

View Details