PRECISE SPECTRAL ANALYZER 9kHz-2.2GHz ANRITSU MS2601 / #8 W2D 5577

Description: Welcome to the Patkor store auctionIn this auction we offer: Price for 1 piece!! We offer you a spectrum analyzer produced by the Japanese company Anritsu The device is type MS2601 The analyzer's operating range is from 9kHz to 2.2GHz The offered analyzer is equipped with full frequency synthesis and extensive measurement capabilities. It enables measurements with a resolution of 30 Hz and a width of the observed spectrum of 100 Hz per plot It is also equipped with an auto-calibration function and markers with a resolution of 1 Hz The internal frequency standard has a stability of 5x10 to -8 Thanks to the digital memory, the device works brilliantly with very slow tuning times, which allows measurements of noise and frequencies close to the carrier frequency. Such measurements are made much easier by a set of video filters. which starts at 1Hz in this device NOTE: the analyzer is in the K option, i.e. the signal input has an impedance of 75Ω The impedance difference causes a slight input mismatch and an amplitude measurement error of 0.7 dB It practically does not interfere with measurements. you can set the offset so that the readings on the screen match 100% It is also possible to install a 50-75Ω broadband transformer, but this does not make sense because we lose about 2dB per transformer. The device is adapted to field measurements and has the ability to enter a table of amplitude corrections, which is taken into account during measurements. The analyzer has two intermediate frequency outputs: 3.6MHz and 50MHz The 3.6MHz output is perfect for connecting a shortwave receiver. In SWEEP mode 0, the analyzer works as a tuned high-frequency tuner. TECHNICAL DATA: Operating frequency range 9kHz -2.2GHz Range of the observed sweep spectrum from 1kHz to full band, quantization 1-2-5. Possible operation with 0Hz sweep, the device works as a measuring receiver Resolution (pcz filters) from 30Hz to 1MHz quantization 1-3 Frequency standard 10MHz stability 5x10 to -8 Dynamics from -124dBm to +120dBm Amplitude unevenness: - 0.5dB from 100kHz to 1.5GHz - 1.5dB from 9kHz to 2.2GHz Self-noise level better than -114dBm Built-in markers, amplitude and frequency measurement. Video signal output. HPIB interface. Autocalibration. Power supply 230V 50Hz Dimensions 29x18x45 cm The offered analyzer is in very good technical condition, has been tested and passes all self-tests and auto-calibrations.State: UsedProducent code: MS2601Mark: InnaModel: MS2601 Due to eBay sales limits We do not show the full stock quantity in our offers. Do you want to buy more pieces? Write to us . We will prepare an individual offer on eBay with one shipping cost. Important information!Please make sure you read the following to avoid any misunderstanding when purchasing and shipping.InvoiceWe issue invoices (Information for companies registered in the European Union with an EU VAT number, we issue a 0% VAT invoice, the auction price does not include VAT)Shipment We ship from Poland. We ship worldwide. We offer standard shipping for this auction. If express delivery is required, please write to us. If you want cheaper shipping - write to us. If your country is not on the shipping list - write to us and we will quote shipping for you. Due to the international transaction, the arrival time of the parcel depends on weather conditions, pandemic, customs policy, holidays, etc. If you have any other questions, please write to us.ReturnsWe accept returns in accordance with eBay's regulations. If you are not satisfied with the product - write to us.PLEASE VISIT OUR OTHER AUCTIONS

Price: 2024.26 USD

Location: Rypin

End Time: 2024-11-24T16:35:12.000Z

Shipping Cost: 101 USD