Description: How to use? 1. Pre-heating the cleaning fluid. 2. Remove ink cartridges and the print head. 3. Choose the right type of according to the color of the clogged print head that needs to be cleaned. 4. Inject the cleaning fluid into the print head that needs cleaning with a . Leaving the bottom of the print head be soaked for about 8 hours. 5. Install the print head into the ink cartridge and load the printer, then run the "nozzle cleaning" function twice in printer driver. PS: Please refer to the manual instructions for more details. Notice: 1. After removing the ink cartridges, you could wrap them in plastic wrap and put them in a ziploc bag to prevent them from drying out. 2. The print head must be completely dry after being soaked, and then it can be installed in the printer. Otherwise it may cause short circuit that will lead to the damage of the print head. 3. Don't skip the longer soak if the shorter ones don't work. If that fails, It is recommend to try again after a day or . Package: 1× Printhead Cleaning Fluid(100ml) 2× (10ml) 1× instruction manual Note: This Printhead cleaning fluid only solve illegible marks caused by print head clogging.(vertical stripes, horizontal stripes, text printing or incomplete patterns) Please print a “nozzle check” pattern before purchasing this printhead cleaner. If your printer prompt error and can't print or printhead is missing, printhead error, not properly installed, pls do not purchase this product, it can't solve your problem Inkjet printhead cleaner contains high-performance ingredients such as active enzymes, strong cleaning, special material could protect the print head.80-90 % success rate,depending on the length of inactivity of your printer will determine the effectiveness of this product.Need not to disassemble the print head with simple operation It's safe and simple to use! No need to wait for a clog to ruin your print job and save your money to buy a new printer Depending on your printer model, you may need to run several print head cleaning cycles, It’s about 2-3 times to completely flush the cleaning solution. The effectiveness of this product depends on the time of inactivity of your printer Printhead cleaner applies to OEM/factory ink, dye, pigment, sublimation ink, heat transfer ink and alike. Don't use this product if the “nozzle check” appears the pattern as Figure 7
Price: 17.65 USD
Location: Mount Prospect, Illinois
End Time: 2024-10-06T12:03:50.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Return shipping will be paid by: Seller
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Return policy details:
Color: model 4
Size: A2-for Canon
EAN: 8011605512852
ISBN: 8011605512852
Package Dimensions LxWxH: 4.72x2.44x2.44 Inches
Weight: 0.33 Pounds
Type: Does not apply
Brand: TBTeek
