Professional RF Coax To Composite Video Audio Demodulator TV Tuner North America

Description: Analog Dual TV Tuner With Picture-In-Picture Support Professional RF Coax To Composite Video Audio Demodulator TV Tuner For NTSC System This RF to composite A/V demodulator is a professional grade TV channel converter, designed to work with coax TV signals such as analog UHF/VHF, cable TV or satellite TV2 out, closed circuit TV channels or other RF modulated signals by converting such RF coax feeds into RCA type video audio feeds. Users can watch 1 analog TV channel full screen or 2 channels at the same time on one TV screen for entertainment, monitoring, presentation or recording purpose. This device supports all the coax type A/V signal inputs from: TV/RF out port of the cable box or cable outlet for analog TV UHF/VHF channel broadcast or closed-circuit distribution Satellite receivers or other set top boxes with TV/RF out ports Modulated CCTV surveillance system Cable radio or cable FM station RF modulators used in MATV setup Easy 1-Minute Setup No initial configuration setup needed. No TV channel scan needed.100% hardware operation with easy cable setup. Full-Frequency Demodulator For CATV Satellite Decoding This dual-channel TV tuner has a full-frequency NTSC TV tuner. It can decode all UHF/VHF TV, CATV channels from RF modulator, cable outlet, cable box, set top box with RF TV out. Supports all standard analog cable TV channels from CH1 to CH139 or aerial VHF/UHF channels from CH2 to CH83. The coax RF demodulator can also decode those TV2 output from satellite receivers like DirecTV, Dish Network or all other satellite set top boxes. Dual-Channel Frame Synchronizer Users can choose to watch 1 analog TV channel full screen or 2 channels at the same time on one TV screen. A fast TV window swap button is provided for fast switching between main TV channel screen and PIP screen 2-Channel Split Screen Display 2 TV channels can be displayed in various split screen modes as follows: Single-channel full screen PIP window screen on upper-left/right or lower-left/right corner. Horizontal-split screen with top/bottom video windows Vertical-split screen with left/right video windows Picture-by-picture or quad screen Fast Swap Between Main/PIP Channel Main channel screen and the 2nd TV window can be exchanged instantly by pressing the swap button on the front or IR remote. Easy Add-On TV Tuner Module This RF coax demodulator can be an external TV tuner module for those video monitors with no RF coax inputs. It is also a great TV tuner module for projectors, DVR systems or all other video equipments that do not have RF coax inputs. RF Demodulator For Private MATV System Use This TV tuner can also serve as RF coax demodulator for decoding those RF outputs from cable box, satellite receiver or surveillance DVR. Customers can also use multiple RF modulators for converting each individual video outputs from multiple video equipments into multiple private TV channels and combine them into one coax cable run for further distribution between TVs and demodulated by this device. Last Memory This TV tuner will memorize users' current selection in the system buffer once adjusted. The last-minute PIP screen mode and TV channels will be displayed right away in the same configuration after power cycling or power outage. IR Remote Control This external TV tuner can be fully operated and controlled via remote controller or push buttons on the front panel. Add/Delete TV Channels Users can use the IR remote to program/remove the unwanted TV channels from the reception. The deleted channel will be skipped when flipping channel up/down button and can always be added back if needed. Professional RF coax to RCA video demodulator for NSTC CATV and aerial UHF/VHF system. Watch 1 analog TV channel full screen or 2 channels at the same time on one TV screen from cable outlets or cable boxes/satellite receivers with TV out or modulated surveillance systems. External TV tuner add-on module for video monitors, projectors or DVR systems without RF inputs. 2 TV channels can be presented on TV screen in different split screen modes. Fast TV channel swap between main TV channel and the PIP channel via IR remote or manual push button. Featured with dual-channel frame synchronizer for smooth video output with sharp and clear picture quality. The current screen mode and TV channel will be memorized after the power-off. Full CATV channel frequency support for CH2 to CH139 (48.25 to 883.25MHz) for NTSC system. Full aerial VHF/UHF channel support for CH2 to CH83 (471.25 MHz to 885.25 MHz) Great MATV setup solution for all public A/V broadcast, SMATV systems used in campus, classrooms, hotels, hospitals, sports bars or restaurants. Easy RF input replacement solution for those TVs with broken coax inputs. External TV tuner add-on module for video monitors, projectors or DVR systems without RF inputs. Easy operation via IR remote or push buttons on the front panel. Perfect for existing modulated camera channels and works with quad video processors, multiplexers, and DVR's. Supports last channel memory after power-off or power outage. This coax video demodulator will stay tuned to the last TV channel after being powered off manually or power outage event. This RF demodulator can also be combined with RF modulator for use as a video/audio over coax cable extender kit for many purposes such as CCTV surveillance, multimedia center, etc. Digital LED screen for TV channel display on the front panel of the module to show users the TV channel selected. Automatic video/audio gain control for compensating the input signal level variation for optimal performance. Channel Display: Digital LED Screen TV System Support: NTSC Channel Frequency Range: CATV: CH1 to CH139 (48.25 to 883.25MHz) Air UHF/VHF: CH2 to CH83 (471.25 MHz to 885.25 MHz) RF Input Level: -5 to +30 dbmv RF Input Connector: F-Type male x 1 Video Output Connector: RCA-Type x 1, 1.0Vp-p composite 75 ohms Audio Output Connectors: RCA-Type x 2 Video Refresh Rate: NTSC 60 fields/sec or PAL 50 fields/sec Video Output Resolution: NTSC:720×480 pixels PAL:720×576 pixels Noise Level: 10db (max) Channel/Volume Operation: By IR remote control or push buttons on the front panel Operating Temperature: 0 to 40 degrees C Power Supply: AC 110V-240V with DC 12V 800mA, Center Positive Coax video demodulator tuner IR remote Power adapter User manual

Price: 138 USD

Location: Arcadia, California

End Time: 2024-12-28T05:10:40.000Z

Shipping Cost: 12.9 USD