PWM Brushless Spindle Motor 24V DC 12000rpm ER11 & Driver Board For CNC 3018 Pro

Description: PWM Brushless Spindle Motor 24V DC 12000rpm ER11 & Driver Board For CNC 3018 Pro Package List:1 x Brushless DC Spindle Motor ( ER11 collet is not included) 1 x ER11-A nut1 x Driver Board with case 1 x 200mm Length Cable 1 x 200mm Dupont Cable 1 x 800mm Length Cable 1 x Wrench 4 x T-bolt nut Specifications:Rated Voltage: 24V DCVoltage Range: 18-24 V DCRated Load: 0.142NmOperating Position: Output shaft for verticalNo Load Speed: 12000rpm±10%Rated Load Speed: 10000rpm±10%Number of Poles: 6Number of Phase: 3Driving Method: 3 phase full wave rectified (PWM),you can control the speed of the spindle in Candle/GRBL Software.Dimensions of the spindleWiring diagramThe green drive board in the above picture is the spindle drive board after removing the black shell, and the black one is our other GRBL control board.This brushless spindle motor does not need additional power supply, you just need to connect it according to the above wiring diagram,and connect to the spindle port of the CNC control board to provide 24V power to run this spindle.ApplicationsThe diameter of the motor is 44mm, so it is suitable for most 3018 CNC engraving machine on the market, including 3018-PRO, 3018-PRO Max and other 3018 models,and also suitable for lathes, rolling mills, truck cranes, pumps and conveyors, etc.The spindle comes with a drive board, USB cable and the Collet Holder is pre-installed. ♞【Basic parameters】 Voltage: DC 24V ; No Load Speed: 12000rpm±10% ; Phase: 3 phase ; Rated Load Speed: 10000rpm±10% ; No load current: Resistance : 0.34Ω/phase±10% ; Inductance: 0.22mH/phase±10%, insulation class is B,safer to use.♞【Advantages】The brushless motor is made of high-quality aluminum alloy material, which is strong and durable, with good strength and good corrosion resistance.Compared with other ordinary spindle motors,the brushless design enables a much longer service life of about 50,000 hours.♞【Main applications】 The diameter of the motor is 44mm, so it is suitable for most 3018 CNC engraving machine on the market, including 3018-PRO, 3018-PRO Max and other 3018 models,and also suitable for lathes, rolling mills, truck cranes, pumps and conveyors, etc.The spindle comes with a drive board, USB cable and the Collet Holder is pre-installed.♞【Low noise and high machining accuracy】 the brushless spindle motor is much quieter than other normal motors, up to 26dB quieter during operation.The performance of high stability operation makes it ideal for high precision engraving. Shipping Please open the package and check if there are some damages before sign, if there are some damages , please do not sign and contact us immediately Items will be shipped within 1-2 days upon the receipt of payment. Payment We accept paypal payment, all Paypal must be confirmed(shipping and billing address must match and correct and it need tell us your telephone no for delivery) Problem&Feedback Please give us the opportunity to resolve any problem when you have, we concern your problem and we will try our best to resolve it. We are a new member in ebay now, and need understand both of sides Pls email us before you want to leave any negative feedback Refund When you have the parcel, and not satisfied the goods or it is other problem like as broken,pls tell us the detail reason and provide the photos Any reason required for all refund. Item must be in it's original condition and no physical damage. Buyer responsible for all shipping cost Contact us Welcome worldwide customer inquire and questions, we will try to do our best to feedback customer’s email within 1-2 business days,if not pls check the mail box again Customer’s satisfaction is very important to us.

Price: 90 USD

Location: Changzhou,Jiangsu

End Time: 2024-08-20T06:12:39.000Z

Shipping Cost: 18 USD