Rohde & Schwarz FSH4 4.04 Handheld Spectrum Analyzer w/ Preamp R&S FSH-4

Description: The Following Items Are Included: Rohde & Schwarz FSH4 4.04 Spectrum Analyzer w/ Options: (BC# 37615-L/T*) Preamplifier Armored Test Port Cable Ethernet Cable BNC Cable 4GB SD Card USB PC Interface Cable AC Adapter/Charger Power Cord User Manual On CD-ROM Carrying Case (G) BE SURE TO CHECK OUR EBAY STORE FOR OTHER ITEMS! This Item Has A Current Calibration! Rohde & Schwarz FSH4 4.04 Handheld Spectrum Analyzer w/ PreamplifierFrequency Range: 100 KHz to 3.6 GHzIncludes Carrying Case & Accessories As Listed Above! Working Condition: ExcellentCondition: RefurbishedCalibrated: YesWarranty: 1 YEAR WARRANTY Rohde & Schwarz FSH4 Spectrum AnalyzerThe R&S®FSH4 is a spectrum analyzer and depending on the model and the options installed – a power meter, a cable and antenna tester and a two-port vector network analyzer. It provides the three most important RF analysis functions that an RF service technician or an installation and maintenance team needs to solve daily routine measurement tasks. For example, it can be used for maintaining or installing transmitter systems, checking cables and antennas, assessing signal quality in broadcasting, radiocommunications and service, measuring electric field strength or in simple lab applications. The R&S®FSH4 can perform any of these tasks quickly, reliably and with high measurement accuracy.Weighing only 3 kg, the R&S®R&S®FSH4 is a handy instrument. All frequently used functions have their own function keys and are within fingertip reach. The brilliant color display is easy to read even under poor lighting conditions, and it has a monochrome mode for extreme conditions.The capacity of the R&S®FSH4 battery enables uninterrupted operation for up to 4.5 hours. The battery is changed within seconds. And if it rains? No problem – all connectors are splash-proof. Power measurements on pulsed signalsBy means of the TDMA POWER function, the R&S®FSH4 performs time-domain power measurements within a time division multiple access (TDMA) timeslot. To make work easier for the user, all required instrument settings are already predefined for the GSM and EDGE standards.Channel power measurementsThe R&S®FSH4 determines the power of a definable transmission channel by means of the channel power measurement function. A channel power measurement for the LTE, 3GPP WCDMA, cdmaOne and CDMA2000® 1x digital mobile radio standards is performed at a keystroke.Field strength measurements with directional antennasWhen measuring electric field strength, the R&S®FSH4 takes into account the specific antenna factors of the connected antenna. The field strength is displayed directly in dBμV/m. If W/m2 is selected, the power flux density is calculated and displayed. In addition, frequency dependent loss or gain, e.g. of a cable or amplifier, can be corrected. For simple result analysis, the R&S®FSH4 provides two user-definable limit lines with automatic limit monitoring.Quick function selection via keypad and rotary knobThe R&S®FSH4 is operated via the keypad and rotary knob. The selected function can be activated directly using the Enter button integrated into the rotary knob. The vertical design puts all operating elements within fingertip reach. The MODE key is used to switch between the various operating modes such as “spectrum analyzer“, “vector network analyzer“, “digital modulation analysis“ and “power meter“.All basic settings can be conveniently made in a straightforward list. Measurement results, including instrument settings, are saved to the internal memory, the replaceable SD memory card or to a USB stick. Predefined instrument settings can be locked to prevent them from being changed unintentionally. This reduces the risk of incorrect measurements.The USER key allows frequently required measurements to be collected in a single menu. User-defined instrument setups are assigned to softkeys under a user-definable nameOptimal reading of measurement results in any situationThe measurement results are easy to read on the brilliant, clearly laid out 6.5" VGA color display. The backlighting of the display can be adjusted to the ambient lighting conditions. For use in extremely strong sunlight, a special monochrome mode provides optimal contrast.Features: Frequency range from 100 kHz to 3.6 GHz High sensitivity (< –141 dBm (1 Hz), with preamplifier < –161 dBm (1 Hz)) 20 MHz demodulation bandwidth for analyzing LTE signals Low measurement uncertainty (< 1 dB) Internal tracking generator and VSWR bridge with built-in DC voltage supply Easy handling due to low weight (3 kg with battery) and easy-to-reach function keys Specifications: Frequency range 100 kHz to 3.6 GHz Resolution bandwidths 10 Hz to 3 MHz Displayed average noise levelwithout preamplifier, RBW = 1 Hz (normalized) 100 kHz to 1 MHz: < –115 dBm, typ. –125 dBm1 MHz to 10 MHz: < –136 dBm, typ. –144 dBm10 MHz to 2 GHz: < –141 dBm, typ. –146 dBm2 GHz to 3.6 GHz: < –138 dBm, typ. –143 dBm with preamplifier, RBW = 1 Hz (normalized) 100 kHz to 1 MHz: < –133 dBm, typ. –143 dBm1 MHz to 10 MHz: < –157 dBm, typ. –161 dBm10 MHz to 2 GHz: < –161 dBm, typ. –165 dBm2 GHz to 3.6 GHz: < –159 dBm, typ. –163 dBm Third-order intercept (IP3) 300 MHz to 3.6 GHz: > 10 dBm, typ. +15 dBm Phase noisefrequency 500 MHz 30 kHz carrier offset: < –95 dBc (1 Hz), typ. –105 dBc (1 Hz)100 kHz carrier offset: < –100 dBc (1 Hz), typ. –110 dBc (1 Hz)1 MHz carrier offset: < –120 dBc (1 Hz), typ. –127 dBc (1 Hz) Detectors sample, max peak, min peak, auto peak, RMS Level measurement uncertainty 10 MHz < f ≤ 3.6 GHz: < 1 dB, typ. 0.5 dB Display 6.5" color LCD with VGA resolution Battery operating time (without tracking generator) up to 3 h Dimensions (W × H × D) 194 mm × 300 mm × 69 mm (144 mm) 1) 7.6 in × 11.8 in × 2.7 in (5.7 in)1) Weight 3 kg (6.6 lb) For full Rohde & Schwarz FSH4 product specifications, please click here: Rohde & Schwarz FSH4 Please check our Huge Inventory with savings of up to 80% off of retail on Cat5/5e/6 LAN Cable Certifiers and Fiber Optic OTDR's, Fusion Splicers, CATV Meters, Fiber Optic Kits, Sources, Meters, Tools, Network Analyzers and much more. Here is a Link to our Ebay Test Equipment Store. All of our Test Equipment is backed with a Full Warranty and unbeatable customer support & service. Please don't hesitate to contact us for a Quote on Something you don't see in our inventory, sometimes we have items that may have not been listed or processed yet. Test Equipment Store Offers a wide range of Refurbished Telecom/ Datacom Tools and Test Measurement Equipment. Which includes Fiber Optic Test and Splicing tools, Fusion Splicers, OTDRs, Copper and Fiber Cable Certifiers, CATV Test Equipment, Cable and Antenna Analyzers, Network Analyzers and much more! We carry a large inventory of quality refurbished and used test equipment from all the major manufacturers. If you are looking for multiple quantities or if we don't have a listing for a particular item that you are looking for. Please contact us as it may be fresh inventory waiting to be listed or we'll be glad to find it for you at the best price possible and put up an eBay listing for you! We Ship World Wide! We will attempt to ship your item(s) within 24 hours after payment has been received. To get a real-time shipping quote to your destination, enter your country and zip / postal code information into the shipping calculator and click "Get Rate".Many countries impose their own customs, duties, tariffs, taxes, etc. on items being shipped from a foreign country. We do not cover those cost's and we recommend that you contact your countries customs agency for that information.We Offer Multiple Quantity Price & Shipping Discounts, Email Us If You Are Interested In Larger Quantities. We accept credit card payment transactions via the online checkout system! The checkout process is designed so that it communicates with the merchant to confirm that payment has been made and cleared. Other methods of payment are outlined through the online checkout process. Winning bidders must contact us within 3 days after auction close if special payment arrangements are needed. Your payment is expected within 5 days after the auction close. Unpaid auctions will be forfeited after 5 days of the auction close and the Item(s) will be relisted for sale. Items will be shipped within 24 hours (1 Business Day) upon receipt of payment from the winning bidder. (Certain orders may take longer for processing due to comprehensive final service inspections) A Shipment Tracking number(s) will be provided to inform Buyers of their expected ETA (Estimated Time of Arrival). Tracking number(s) will be provided the same day as order shipment. Thank you ALL MAJOR CREDIT CARDS & PayPal ACCEPTED Sell Smarter with Kyozou.Inventory and Ecommerce Management

Price: 3859 USD

Location: Southgate, Michigan

End Time: 2024-11-07T15:32:24.000Z

Shipping Cost: N/A USD