ROUNDHOUSE MDC BOXCAB or CLIMAX CAN MOTOR FLYWHEEL RE-GEAR UPGRADE KIT

Description: PLEASE READ DESCRIPTION THOROUGHLY and LOOK AT THE PHOTOS! This sale is for brand new can motor flywheel and re-gear upgrade kit for the MDC Roundhouse boxcab diesel or Climax steam locomotive. This kit will provide smooth low speed operation, A LOWER TOP SPEED, and operating noise will be greatly reduced. The new motor has very high torque, and it is silent when operating at 12 VDC. This motor will start turning smoothly on 1 volt DC. This kit is designed to replace the old Pittman style open frame motor, not the newer square MDC motor. The newer version MDC motor is a good quality motor, and it does not need to be replaced. This kit also replaces the noisy MDC motor pinion gear, idler gear, and flywheel. This kit will only work in early version locomotives that have an idler gear mounted on the chassis between the motor and the bull gear. This kit will not work in later versions that have the idler gear mounted inside the bull gear housing. Please check your locomotive before purchasing this kit. If you have any questions, please contact me before purchasing this kit. If you are not sure what version you have, please contact me before purchasing this kit. This may save you the hassle of returning the kit. The new motor measures 12mm wide x 16mm high x 27mm long. The motor shaft is 1.5mm in diameter and it is10mm long. The flywheel measures 13mm in diameter and it is 13mm long. The flywheel shaft is 2.4mm in diameter and it is 16mm long. The replacement motor pinion gear is bored for a 2.4mm shaft. The motor kit comes with one can motor, flywheel, flywheel shaft, a new motor pinion gear, hook up wire, and illustrated installation instructions. See 2nd photo for contents of the motor kit What you see in the 2nd photo is what you will receive. At 12 volts DC with no load, this motor draws 50ma and develops 9550rpm, the stall current at 12 VDC is 1 amp. This motor is DCC compatible. PLEASE NOTE the chassis shown in the photo is NOT included with the motor kit. This is an unassembled kit. This kit is easy to install, installation time is about 2 hours. If you have any questions, please contact me. Motor kits will be shipped VIS USPS Ground Advantage Note to international buyers: eBay determines the rates for international shipping, not me, I have no control over what eBay charges for international shipping Thanks for looking

Price: 28.95 USD

Location: Prescott Valley, Arizona

End Time: 2024-12-10T23:42:48.000Z

Shipping Cost: 6.75 USD