Smith and Nephew 660HD-E Enhanced Image Management System Ref # 72204668

Description: Smith and Nephew 660HD-E Enhanced Image Management System Ref # 72204668Version 2.00.00; 2003-2019 The Smith & Nephew 660HD-E Image Management System (660HD-E System) is designed to capture intraoperative still images and video clips using the camera system, front panel, optional keyboard, and optional footswitch. Images, video clips, audio clips, procedure data, and patient information are captured and stored in a patient record. Patient records can be edited and stored on transportable media or printed. Patient records can also be exported to an Ethernet network for long-term archival, retrieval, or printing.The 660HD-E is compatible with 1080i HD camera systems and standard definition camera systems. Good Cosmetic condition Signs of normal wear. Unit Working. Cleaned prior to shipping. Specifications: Front Panel Video Inputs: 1 x AUX:75 ohm terminated Composite BNC Video Formats: NTSC and PALVideo input is diode-protected for over-voltage conditions. Ports: 3 x USB 2.0: Type A receptacle, software compatible with NS16C550 Note: USB ports are compatible only with USB 2.0 compliant storage devices, keyboards, mice, and printers. Rear Panel Video Inputs: 2 x 4-pin mini DIN 75 Ω terminated S-Video (Y/C) 1 x 75 Ω terminated Composite BNC; 1 x 75 Ω terminated HDSDI BNC Video Formats: NTSC and PAL Video Outputs 1 x 4-pin mini DIN 75 Ω terminated S-Video (Y/C) 1 x 75 Ω terminated Composite BNC 1 x 75 Ω terminated HDSDI BNC 1 x DVI Video Formats: NTSC and PAL Ports 1 x VGA: 15-pin female 1 x HDMI: 19-pin female 4 x USB 3.0: Type A receptacle, software compatible with NS16C550 2 x Serial: UART with male DB-9 receptacle 2 x Ethernet: Auto-select 10Base-T/100Base-TX/1000Base-T Microphone in: TRS female connector, -50 dBV, 150 Ω impedance 3 x Accessory: 3.5 mm mini-jacks – Still Capture, Still Capture Loop Power: Power Cord Connector Controls: Power up/power down, LCD Touch/Display Screen. Touch Screen controls are described in the “Setup” and “Operation”sections of this manual.Displays: LCD Touch/Display Screen. Touch Screen displays are described in the “Setup” and “Operation” sections of this manual.Operating System: Microsoft[tm] Windows® 10 IoT Enterprise LTSB 1607 64-BitHard Drive: Minimum 500 GB Memory: Minimum 2 GB Still Image File Format: 24-bit RGB BMP (.bmp) file; 24-bit RGB BMP (.bmp) fileStill Image Maximum Resolution: NTSC/PAL: Up to 1920 x 1080 @ 24-bit color depth Display Output: NTSC/PAL – Real Time Composite, S-Video, SDI; HDSDI, DVI; HDSDI, DVIPower Requirement: Input Voltage: 100–240V~, 50/60 Hz; Power Consumption: 125 VADimension: 8 in. H X 12 in. W X 14 in. D (20.32 cm H X 30.48 cm W X 35.56 cm D)Weight: 16 lbs Compliance: IEC 60601-1:1988 + A1:1991, and + A2:1995, IEC 60601-1:2005 + A1:2012, and IEC 60601-1-2:2014 Includes: Power cord and stylus This item is Being Sold in "AS IS" condition & the seller assumes no responsibility for the proper or improper use of the product. If the item is to be used in conjunction with patient care and/or diagnosis, it is responsibility of the buyer to get proper certifications/licenses for the use of the item. It would be highly recommended and wise to have a bio-med completely check the product for its performance and safety parameters before actual use for patient care and/or diagnosis. The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so, do not bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping of the item. Please contact us if you have question or clarification. We will be glad to assist you. Tracelogix Corporation3605 Knight RoadMemphis, TN 38118

Price: 245 USD

Location: Memphis, Tennessee

End Time: 2024-09-08T19:32:17.000Z

Shipping Cost: N/A USD