Sonnax 77733-06KA Smart-Tech® Input Housing Kit 4L60, 4L60-E, 4L65-E, 4L70-E

Description: 4L60, 4L60-E, 4L65-E, 4L70-E Smart-Tech® Input Housing KitPart No. 77733-06KALimitations of the GM 4L60 series OE input housing are the root cause of 3-4 burnup in performance applications. The weak OE backing plate’s limited space. Stop the failure.Sonnax Smart-Tech input housing kit 77733-06KA makes room for a taller clutch pack anchored in place by a stronger backing plate — the most reliable way to increase clutch capacity and protect against destructive heat.To avoid the problems found with older, OE housing designs, Sonnax starts with the latest production, new housings from GM. These improved housings have splines for the input shaft that are cut at minimum spec for reliable shaft retention and sealing. The housings also benefit from added material for a thicker, more consistent cross-section that protects against breakage.Combined with other Sonnax improvements, the Smart-Tech input housing guarantees the ultimate combination of durability and protection against failure in high horsepower, higher pressure applications. The housing also is available with a pre-installed, Sonnax heavy-duty input shaft.Physically larger clutch pack area for increased 3-4 clutch capacity without sacrificing clutch durability. Use your choice of:Eight .067" frictions with seven .095" steelsNine .062" frictions with eight .077" steelsAnchored backing plate keeps clutches parallel to stop the flexing and distortion that leads to heat build-up100% New housing optimizes input shaft fitment and is further upgraded for significantly more resistant to fatigue failureSteel reinforcement sleeve prevents breakage in the spline areaCustom backing plate replaces OE retaining ring to eliminate risk of blowoutDoes not include input shaft Warning:Earlier versions of this kit required an aluminum forward piston. It is recommended to follow the specific instructions provided during assembly to avoid a mismatch of parts. A NAME YOU CAN TRUSTAs an industry veteran in the transmission parts supply business, you can buy with confidence. Our goal is to provide high quality parts, an experienced sales force, and the highest levels of product availability possible.Important InformationShippingReturnsCore PolicyImportant InformationShippingReturnsCore Policy As a buyer, it is your responsibility to verify that this product is compatible with your application. For any general questions, technical support, or to verify part fitment please send us a message. Our support is free, and we typically respond within minutes. Your order will be shipped within 1 business days (MON-FRI excluding holidays) of receiving payment and you should expect to receive it five to seven days via US Postal Service or UPS Ground Standard Shipping unless another shipping method is chosen. In addition to UPS Ground, we offer expedited services as well as local pick-up. Please contact us if a quote is needed and we will be happy to work with you. Please Note: All packages valued at over $500 WILL require a signature upon delivery. If your package arrives damaged, please do not open and contact us immediately. If your package is returned by the carrier due to address errors, you will be responsible for the shipping cost. International Customers: Please make sure you monitor your package. Any import duty/taxes must be paid by the buyer. If you do not pay in a timely fashion your package will be returned. You will not receive a refund for the returned items until they’re delivered. Shipping fees will not be reimbursed. 30 Day return policy for unused, uninstalled items. Any product you return must be in the same condition you received it and in the original packaging. If you’re having an issue with a used or remanufactured item and it’s been installed, we require the buyer to contact us immediately so we can provide trouble shooting information. Worst case scenario if that fails, exchange only. Certain item such as used items, tools, and one time use items are not eligible for return. As a buyer, it is your responsibility to verify that this product is compatible with your application. If you ordered the wrong item for your application YOU are responsible for the return shipping. 20% Restocking Fee May Apply If you are purchasing an item in which a core charge is required, please be sure your contact information is current. If core charge is not paid within 1 week of purchase, your order will be cancelled. Upon receiving your new part, there will be a prepaid shipping label included so you can return your core (old part) to us free of charge. Please make sure to use the label we send you. You have 14 days to ship your core back to us from the time your new part was delivered. If you do not ship the core within 14 days, you WILL LOSE YOUR REFUNDABLE CORE CHARGE. Exceptions are possible, BUT YOU MUST contact us to make us aware of the situation. ATTENTION INTERNATIONAL BUYERS: Due to the inflation of shipping costs, we are unable to pay for the return shipping on the core. If you want the core charge refunded, you will have to pay for shipping. We apologize for any inconvenience this may cause. Once your core is delivered, please allow 3-5 business days for your refund to be processed. See our other items4L60, 4L60-E, 4L65-E, 4L70-E Smart-Tech® Input Housing Kit Part No. 77733-06KA Limitations of the GM 4L60 series OE input housing are the root cause of 3-4 burnup in performance applications. The weak OE backing plate’s limited space. Stop the failure. Sonnax Smart-Tech input housing kit 77733-06KA makes room for a taller clutch pack anchored in place by a stronger backing plate — the most reliable way to increase clutch capacity and protect against destructive heat. To avoid the problems found with older, OE housing designs, Sonnax starts with the latest production, new housings from GM. These improved housings have splines for the input shaft that are cut at minimum spec for reliable shaft retention and sealing. The housings also benefit from added material for a thicker, more consistent cross-section that protects against breakage. Combined with other Sonnax improvements, the Smart-Tech input housing guarantees the ultimate combination of durability and protection against failure in high horsepower, higher pressure applications. The housing also is available with a pre-installed, Sonnax heavy-duty input shaft. ---Physically larger clutch pack area for increased 3-4 clutch capacity without sacrificing clutch durability. Use your choice of: ---Eight .067" frictions with seven .095" steels ---Nine .062" frictions with eight .077" steels ---Anchored backing plate keeps clutches parallel to stop the flexing and distortion that leads to heat build-up ---100% New housing optimizes input shaft fitment and is further upgraded for significantly more resistant to fatigue failure ---Steel reinforcement sleeve prevents breakage in the spline area ---Custom backing plate replaces OE retaining ring to eliminate risk of blowout Does not include input shaft Warning: Earlier versions of this kit required an aluminum forward piston. It is recommended to follow the specific instructions provided during assembly to avoid a mismatch of parts. 4L60, 4L60-E, 4L65-E, 4L70-E Smart-Tech® Input Housing KitPart No. 77733-06KALimitations of the GM 4L60 series OE input housing are the root cause of 3-4 burnup in performance applications. The weak OE backing plate’s limited space. Stop the failure.Sonnax Smart-Tech input housing kit 77733-06KA makes room for a taller clutch pack anchored in place by a stronger backing plate — the most reliable way to increase clutch capacity and protect against destructive heat.To avoid the problems found with older, OE housing designs, Sonnax starts with the latest production, new housings from GM. These improved housings have splines for the input shaft that are cut at minimum spec for reliable shaft retention and sealing. The housings also benefit from added material for a thicker, more consistent cross-section that protects against breakage.Combined with other Sonnax improvements, the Smart-Tech input housing guarantees the ultimate combination of durability and protection against failure in high horsepower, higher pressure applications. The housing also is available with a pre-installed, Sonnax heavy-duty input shaft.Physically larger clutch pack area for increased 3-4 clutch capacity without sacrificing clutch durability. Use your choice of:Eight .067" frictions with seven .095" steelsNine .062" frictions with eight .077" steelsAnchored backing plate keeps clutches parallel to stop the flexing and distortion that leads to heat build-up100% New housing optimizes input shaft fitment and is further upgraded for significantly more resistant to fatigue failureSteel reinforcement sleeve prevents breakage in the spline areaCustom backing plate replaces OE retaining ring to eliminate risk of blowoutDoes not include input shaft Warning:Earlier versions of this kit required an aluminum forward piston. It is recommended to follow the specific instructions provided during assembly to avoid a mismatch of parts. A NAME YOU CAN TRUSTAs an industry veteran in the transmission parts supply business, you can buy with confidence. Our goal is to provide high quality parts, an experienced sales force, and the highest levels of product availability possible.Important Information As a buyer, it is your responsibility to verify that this product is compatible with your application. For any general questions, technical support, or to verify part fitment please send us a message. Our support is free, and we typically respond within minutes. Shipping Your order will be shipped within 1 business days (MON-FRI excluding holidays) of receiving payment and you should expect to receive it five to seven days via US Postal Service or UPS Ground Standard Shipping unless another shipping method is chosen. In addition to UPS Ground, we offer expedited services as well as local pick-up. Please contact us if a quote is needed and we will be happy to work with you. Please Note: All packages valued at over $500 WILL require a signature upon delivery. If your package arrives damaged, please do not open and contact us immediately. If your package is returned by the carrier due to address errors, you will be responsible for the shipping cost. International Customers: Please make sure you monitor your package. Any import duty/taxes must be paid by the buyer. If you do not pay in a timely fashion your package will be returned. You will not receive a refund for the returned items until they’re delivered. Shipping fees will not be reimbursed. Returns 30 Day return policy for unused, uninstalled items. Any product you return must be in the same condition you received it and in the original packaging. If you’re having an issue with a used or remanufactured item and it’s been installed, we require the buyer to contact us immediately so we can provide trouble shooting information. Worst case scenario if that fails, exchange only. Certain item such as used items, tools, and one time use items are not eligible for return. As a buyer, it is your responsibility to verify that this product is compatible with your application. If you ordered the wrong item for your application YOU are responsible for the return shipping. 20% Restocking Fee May Apply Core Policy If you are purchasing an item in which a core charge is required, please be sure your contact information is current. If core charge is not paid within 1 week of purchase, your order will be cancelled. Upon receiving your new part, there will be a prepaid shipping label included so you can return your core (old part) to us free of charge. Please make sure to use the label we send you. You have 14 days to ship your core back to us from the time your new part was delivered. If you do not ship the core within 14 days, you WILL LOSE YOUR REFUNDABLE CORE CHARGE. Exceptions are possible, BUT YOU MUST contact us to make us aware of the situation. ATTENTION INTERNATIONAL BUYERS: Due to the inflation of shipping costs, we are unable to pay for the return shipping on the core. If you want the core charge refunded, you will have to pay for shipping. We apologize for any inconvenience this may cause. Once your core is delivered, please allow 3-5 business days for your refund to be processed. See our other items 4L60, 4L60-E, 4L65-E, 4L70-E Smart-Tech® Input Housing KitPart No. 77733-06KALimitations of the GM 4L60 series OE input housing are the root cause of 3-4 burnup in performance applications. The weak OE backing plate’s limited space. Stop the failure.Sonnax Smart-Tech input housing kit 77733-06KA makes room for a taller clutch pack anchored in place by a stronger backing plate — the most reliable way to increase clutch capacity and protect against destructive heat.To avoid the problems found with older, OE housing designs, Sonnax starts with the latest production, new housings from GM. These improved housings have splines for the input shaft that are cut at minimum spec for reliable shaft retention and sealing. The housings also benefit from added material for a thicker, more consistent cross-section that protects against breakage.Combined with other Sonnax improvements, the Smart-Tech input housing guarantees the ultimate combination of durability and protection against failure in high horsepower, higher pressure applications. The housing also is available with a pre-installed, Sonnax heavy-duty input shaft.Physically larger clutch pack area for increased 3-4 clutch capacity without sacrificing clutch durability. Use your choice of:Eight .067" frictions with seven .095" steelsNine .062" frictions with eight .077" steelsAnchored backing plate keeps clutches parallel to stop the flexing and distortion that leads to heat build-up100% New housing optimizes input shaft fitment and is further upgraded for significantly more resistant to fatigue failureSteel reinforcement sleeve prevents breakage in the spline areaCustom backing plate replaces OE retaining ring to eliminate risk of blowoutDoes not include input shaft Warning:Earlier versions of this kit required an aluminum forward piston. It is recommended to follow the specific instructions provided during assembly to avoid a mismatch of parts.

Price: 805.2 USD

Location: Shepherdsville, Kentucky

End Time: 2024-10-13T20:32:09.000Z

Shipping Cost: N/A USD