Star Trek Metal Nozzle Kit, Greg Jein Reproduction, Just The Nozzle

Description: In general: all parts are shipped with the machine finish as shown in the LISTING PHOTOS. Final finishing is by the Buyer (prop maker) and may include whatever; polishing, graining, distressing, acid washes, electroplating, and other treatments as selected and executed by the Buyer. Most parts will have some cosmetic blemishes that the Buyer may/may-not want to remove or enhance. Thank You.Star Trek TOS, Spinner Hero Grade Phaser Nozzle, Universal Type For Any Project You Select This is a recreation of Greg Jein owned Hero nozzle, One Per Order. Can be fit to Any Project By You The Prop Builder. Do some educational Star Trek web surfing. This recreation was carefully copied paying special attention to everything. Engineered & re-engineered by me to allow a quick retrofit to, fiberglass heros, Art Asylum P2 TOS shells or any shell you like.Fits 7/16 inch mounting hole.Accepts (smoothly) 5/16 inch diameter acrylic emitters.Shells will require modification and fitting of nozzle to shell.The aluminum is NOT ANODIZED. Acrylic Emitter Fitting: Custom by you. 5/16 inch(es) nominal material can be used (just a suggestion).NO ACRYLIC EMITTER INCLUDED. NO PHASERS INCLUDED. Phaser Installed Photos & OTHER ASSEMBLED PHOTOS for reference and information purpose only. EACH SET INCLUDES: ONE THREE-PART NOZZLE ONLY.ALL THREE PARTS IN THE SET ARE PRE-DRILLED AND PRE-SLOTTED JUST AS SHOWN IN LISTING PHOTOGRAPHS.PARTS ARE ENGINEERED TO DROP-IN-PLACE (INTO A HOLE) FOR EASE OF USE.THIS SET CAN BE A GREAT TIME SAVER FOR ANY BUILDER AND THE PARTS ARE SUPER ACCURATE.THE LENGTH OF THE TUBE EXTENDING OUT THE BACK OF THE NOZZLE CAN BE CUT/FILED/SANDED TO MEET YOUR SPECIFIC NEEDS ALUMINUM NOZZLE SIZE & DETAILS The standard Trek nominal: 1-3/16 inch(es) diameter x 1 inch(es) long exposed decorative part. Overall part is nominal 1-7/8 inch(es). Nozzle Emitter Thru Hole Size: See listing pictures.Slot is 0.0934 wide (just over 3/32 inches) and will accommodate my brass sled-tube assembly (sold separate OR buy the kit with everything)Side-Turn Cradle Pilot Hole Location: 3/8 inch(es)-back from nozzle base is 1/4 diameter hole on large side and 1/8 inch diameter hole opposite. Nozzle Has Three part design with spinner knurl section. No Ratchet effect, true to the HMS Roddenberry Prop spinner mechanism. Nozzle medium size front OUTER NOZZLE radius matches Greg Jein Hero. Perfect knurl alignment thanks to new tooling. This item is exquisite in every way. Entirely machined and end milled, the knurl is not extruded aluminum !! D Stines quality or your money back.Material of Nozzle is: Finished 6063-T5 Aluminum Alloy (British HE9), not hard anodized: ready for traditional light bulb installation, LED or, anything you come up with.This three part NOZZLE design (Roddenberry Spinner/Greg Jein type mechanics) extensively prototyped.. NEED MORE ?? MESSAGE ME ON EBAY... Warranty & Service Information: Hate it? Return it in 30 days following eBay Policy. I have received feedback that my parts had no oily residue on them, BE ADVISED: Coolant-Residue / Thin-Oil-Film on Phaser Metal parts & Phaser Metal Parts Kits can not be seen nor felt with the hand, however, the residue is there and it is important to follow my suggestion that all parts be washed in Dawn dish-washing soap (or a similar detergent) to be certain there is on oily residue that could interfere with paint-bonding and/or adhesive bonding.NOTICE © and TM 2021. jonpaultrek2012 ® is a registered trademark with the United States Patent and Trademark Office Reg. No.6,431,925

Price: 31.36 USD

Location: Brooksville, Florida

End Time: 2023-08-10T14:34:00.000Z

Shipping Cost: 3.99 USD