Starlink/Ethernet Cable passthrough Entry Grommet for RVs and Other Vehicles

Description: This is a simple and effective way to get a Starlink (or Ethernet) cable into an RV or other vehicle without cutting wires, crimping, or using couplers. It is designed to be bug and water-resistant, and comes in four lengths to choose from: 25mm / 1" (for doors/walls up to 15mm / ⁹/₁₆" thick).45mm / 1 ³/₄" (for doors/walls up to 35mm / 1 ³/₈" thick).65mm / 2 ⁹/₁₆" (for doors/walls up to 55mm / 2 ³/₁₆" thick).85mm / 3 ³/₈" (for doors/walls up to 75mm / 3" thick). Features: Bug and water-resistantEasy to install - no cutting, crimping, or couplers requiredComes in four lengths to choose fromMade from high-temperature plastic PETG that will not warp or soften in high-temperature environments To install: Drill a 22mm (7/8") hole in the storage compartment door or other desired location.Feed the Starlink (or Ethernet) cable through the hole.Place the "inner" part of the grommet over the loose cable (outside of the door).Place the "outer" part of the grommet over the loose cable (outside of the door).Slide the "outer" part of the grommet over top of the "inner" part to combine them.Insert the combined part into the hole on your door and tighten the nut from the other side. Note: The notch should be facing downwards for optimal water resistance. This listing is for a complete set of grommets, including the inner and outer parts, nut, and filler piece.

Price: 12.99 USD

Location: Wylie, Texas

End Time: 2024-09-23T21:01:23.000Z

Shipping Cost: 0 USD