Description: Trio Kenwood TA-200W Power Amp Module for KR-9600. Lot number 831. YOU ARE BIDDING ON ONE IC. Look at the measurements and choose the one you want A, B or C. I THINK (B) MAYBE BAD . (if you want more then one let me know.) I found some french documentation on these showing the internal circuit and tested as best i could. I have included the measurements for each IC (A,B,C). The (N-P) and (P-N) indicate the multimeter polarity when tested. (For example under N-P / 5-1 i put the Negative meter lead on pin 5 and positive lead on pin 1. All measurements either Meg ohm or K ohm. Tested with both Fluke 8000 and Fluke 87 multimeters. Contact me if you have any issues understanding my notes. I pretty much tested between pins 5 and 1 +10 outputs and also tested the other pins to pin 5. Due to age sold as is for parts or paperweights. Buyer assumes all responsibility. This is no different from when they were purchased new in the 80's, there were no returns on parts of this type. If there is a measurement across any pins you may need i can test . Sorry, its impossible to control what people do with sensitive electronics parts. My dad was an audio service tech in the 1970-90's and i'm (slowly) clearing out his thousands of parts. Most items have gone half way around the world and back so boards may have damage or caps that have been knocked off in our families many moves. Sold as is for parts or paperweight. please look at pictures to determine if these are what you need. Ask all questions BEFORE buying. There are no refunds or returns. Unless specifically mentioned Service manuals shown ARE NOT INCLUDED in the auction and shown for identification purposes only.
Price: 250 USD
Location: Wilson, North Carolina
End Time: 2024-03-02T02:36:53.000Z
Shipping Cost: 5 USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
Brand: Kenwood
