TRIUMPH ROCKET 3 roadster rocket 111 rocket iii rocket ,,, pair 108 mm roadst

Description: Two 108 x 30 mm paint safe stick on decals printed on 3 m then gel coate d ober any questions please ask before engaging in any sale maternal de cal is cut from Metamark MD5 High Performance Calendered Digital Vinyl Product Description Metamark MD5 is a high performance grade polymeric calendered self-adhesive vinyl for printers using solvent inks. The high quality film, adhesive and liner, combined with Metamark’s distinctive coating technology provides outstanding print performance. MD5 is suitable for application onto flat or slightly curved surfaces, such as vehicle graphics, retail signage and window graphics. Printing and Handling  Suitable for use on Solvent, Eco Solvent, Latex and U.V. inkjet printers. Always perform a test print first.  Ensure that the correct profiles and heater settings are used. Most profiles are available for download from www.metamark.co.uk.  Ensure that the material has reached room temperature and a relative humidity of 50% before printing.  Do not handle the face film directly and ensure it is free from dust and static. Application  Allow the inks to cure before cutting flush to the print. This is usually 24-48 hours. (Not applicable to Latex prints)  Apply unstressed, in particular to curves and recesses. It is not suitable for application over rivets or complex recesses.  Suitable for wet application. Always apply dry into recesses, and where the print is cut flush, to ensure best adhesion.  Not recommended for use on low energy surfaces such as polypropylene. The user should determine suitability of substrate. Overlaminating  Overlamination is recommended to prevent abrasion and to extend colour fastness.  Allow the inks to cure before overlaminating, this is usually 24-48 hours.  The matched laminate for MD5 is MetaGuard 700. For all other laminates the user should determine suitability. Face Film Face Film Polymeric calendered PVC Gauge 70 micron nominal Tensile Strength 47N/25mm MD / 43N/25mm TD nom. Elongation at break 180% MD nominal Adhesive Type Permanent clear solvent-based acrylic Weight 22gsm nominal Adhesion to glass 20 mins 15N/25mm nominal Adhesion to glass 24 hour 20N/25mm nominal Perceived tack Medium Application temperature +5C to +60C Service temperature -30C to +110C Roll Presentation Roll sizes and net weights 760mm x 50m 11kg 1370mm x 50m 20kg 1520mm x 50m 22kg 1600mm x 50m 23kg Release Liner Print ‘Metamark Digital Vinyl’ grey print Weight 140 gsm nominal Type Layflat kraft with PE coating Finishes Finishes Available MD5-100 White Gloss MD5-101M White Matt MD5-105 Clear Gloss Durability Shelf Life 2 years External weathering 7 years. This refers to the unprinted vinyl. Refer to ink manufacturer for durability of the finished product. Fire Rating Class B. BS EN 13501-1:2007 BS 6853:1999 Cat1a&b (Passenger Rail) EN ISO 5659-2 (Goods Rail Vehicles) ISO 5658-2 (Goods Rail Vehicles) Dimensional Stability <0.3mm (48h at 70C on aluminium) Chemical Resistance Unprinted film resistant to mineral oils, fats and fuels, aliphatic solvents, mild acids, salt and alkali , eg. diesel oil, gasoline, paraffin, hydraulic oil, antifreeze. Regulations REACH and RoHS compliant Warranty: Metamark (UK) Limited warrants to its customers that graphics produced using Metamark Digital Media will remain in good condition without excessive fading or colour degradation for the specified life time of the ink used, when correctly stored, printed and applied in accordance with procedures outlined in the technical literature. If within the specified years of normal use Metamark DigitalVinyl becomes ineffective for its intended use, then Metamark will provide sufficient material to produce a new replacement marking, and will at its own discretion, contribute an allowance in additional material towards the costs involved in replacing the graphics. In all cases, the converter is held fully responsible for storing, processing and applying the unconverted materials in accordance with Metamark’s technical specifications. Metamark (UK) Limited will not be liable for any indirect or consequential loss or damage, and will not provide any allowance against improper usage, application accident, negligence, chemical damage or improper repair. Please Note: The above data is given in good faith to provide an indication of the performance of the product. Purchasers should consider the suitability of each product for its intended use and the purchaser assumes all risks in connection with such use. Seller shall not be liable for damages in excess of the purchase price of the product nor for incidental nor consequential loss.

Price: 18 GBP

Location: Ingatestone, Essex

End Time: 2024-12-11T10:42:06.000Z

Shipping Cost: 19.44 GBP