USED OMTech 150W CO2 Laser Engraver 40x63 w/ Auto Focus w/ Water Chiller

Description: Slightly USED OMTech 150W CO2 Laser Engraver 40x63 cutting area with Water Chiller. Purchased form OMTech on 5/20/2021 - Used for about 1 week on a leather patch job and has been sitting ever since. Our shop is focusing on screen printing and embroidery and this laser is HUGE and takes up too much of our space. Currently being used a s shelf :) PLEASE NOTE: the auto focus never worked, not sure if it's just a loose wire, so we only manually set laser height unless you know how to fix. SHIPPING/LOCAL PICKUP: Unit is very heavy, would prefer local pickup. If you need it shipped, you will need to arrange and pay for shipping. If you live around the PDX or Tillamook area I could deliver for just gas and time (we own a flatbed tow truck). More Information from the OMTech websiteConvenient Size:39.5" x 62.5" (1000 x 1590 mm) engraving/cutting area86.6" x 64.4" x 39.4" (220 x 164 x 100 cm) overall dimensionsTackle large-scale projects with easeAn adaptable stabilizing base allows easy height adjustment.Specs:Engraving speed: 100 - 600mm/s Cutting speed: 1 - 40mm/s (actual speed depends on material)20mm Focal lens diameter2.5” Focal length25mm Mirror diameterResolution up to 2540 dpi7” Standard Z-depth (Workspace height with honeycomb bed installed and laser head half retracted)8” Max Z-depth (Workspace height with honeycomb bed removed, knife bed in use, and laser head fully retracted upwards)Compatibility:The Ruida control board works seamlessly with LightBurn (not included)LightBurn (not included) are compatible with Windows 7, 8, 10 (64/32 bit), XP, 2000, and Vista.The Ruida controller is compatible with macOS (Version 10.11 and higher) ONLY if you use LightBurn software (not included)Photo-ready to convert images from HPLG, BMP, GIF, JPG, JPEG, DXF, DST, AI formats, and more into .RD files for laser processing. 4-Pin Port connection for rotary axis devices. *Honeycomb bed and the knife bed removal required for 4 Wheel Rotary or Jaw Chuck rotary device usePower:The integrated power supply features increased response speed, performance, and cutting power - it’s beaming with possibilities!Cut up to 1.5" thick plywood and acrylic/plexiglass.Uses standard 110V AC power connectionLaser Tube Lifetime:150W CO2 laser tube with an estimated lifetime of up to 12,000 operation hours depending on power setting usage and water cooling performancePLEASE NOTE: Frequent use of high laser power settings will shorten the laser tube lifetime as follows:Low Power 10–40% = 11,000–12,000 HoursModerate Power 40–70% = 9,000–10,000 HoursHigh Power 70–100% = 7,000–8,000 HoursApplication-Friendly:Materialize your vision: Our CO2 lasers are capable of engraving materials such as wood, glass, leather, acrylic, coated metals (anodized aluminum), and more.Bare metal marking requires a pre-treatment coating.Cutting Edge Features:SUPERIOR LASER POWER: This laser engraving and cutting machine comes with a YL 150W CO2 laser tube to cut through thicker materials and engrave your designs faster, deeper, and clearer.WATER CHILLER INCLUDED: The industrial-strength CW-5200 water chiller (1.6 gallon/6L capacity) keeps your laser tube cool through long workdays, protecting your tube’s integrity. Only use with distilled water, ensuring it stays between 60–70°F (16–21°C).RUIDA DIGITAL CONTROLLER: The intuitive control panel with a digital display allows complete control of the laser head, pausing and stopping projects, adjusting laser power and speed settings, file viewing, and project framing via Windows-compatible RDWorks v8.USB & ETHERNET PORTS: 2 USB ports allow flash drive connectivity and a USB-to-USB PC connection. Plus, the ethernet connection is compatible with PCs.LCD DISPLAY: A secondary display panel monitors the real-time electric current in milliamps and auto-judges fault, easing the troubleshooting process and reducing potential damage to the laser tube and power supply. Plus, it’s accessibly located on the left side of the machine.LINEAR RAIL GUIDING SYSTEM: Equipped with X, Y, and Z stepper motors for efficient power transmission between the guide rails with high precision and long service life. MOTORIZED AUTOFOCUS WORKBED: The autofocus pen senses the correct focus distance from the laser head to the target material and signals the Z-axis motor to automatically raise the workbed to the perfect focus height.VIEWING WINDOW: A transparent acrylic glass viewing window allows observation throughout the laser engraving process. Plus, it’s equipped with a sepia tint to protect your eyes from indirect laser beam exposure.RED DOT GUIDANCE: A red dot pointer mounted on the laser head quickly indicates engraving points, marks the machine’s path, and identifies positioning sizes, allowing an effortless project setup process.ADJUSTABLE LASER NOZZLE: The laser nozzle can extend downwards up to 1.75” or be fully retracted, allowing more control over different focal distance setups.AIR ASSIST: A pre-installed air compressor guides a pressurized air stream through the laser head nozzle to displace debris, heat, and combustible gases from the engraving surface and laser beam path, keeping your workbed cleaner and engravings more precise. FOUR-WAY PASS-THROUGH: There’s always extra room! Equipped with front, side, and rear pass-through doors to accommodate materials larger than the table size. BUILT-IN VENTILATION: A pre-installed vent fan expels smoke and fumes to create a safer workspace and extend the service life of your machine.WATER FLOW SENSOR: A pressure flow sensor monitors water flow throughout the laser engraving process and prevents the laser from firing if water stops circulating through the laser tube. AUTOMATIC SHUTDOWN: The auto-shutdown safety feature stops the machine when opening the transparent window cover. Once closed, press the “Enter” button to continue operation.EFFORTLESS CLEANUP: A debris collection system below the workbed funnels engraving debris into a removable collection tray, helping maintain your machine’s cleanliness and easing the cleanup process.Package Includes:1 x Laser Engraver Machine1 x 150W Laser Tube1 x CW-5200 Water Chiller10 x Hex Wrenches1 x Grounding Wire1 x USB Type-A to Type-A Cable1 x Ethernet to Ethernet Cable1 x Power Cord1 x Tube of Silicone Insulation1 x Roll of Double-Sided Tape2 x Venting Exhaust Ducts (4 ft. max. length)1 x Hose Clamp2 x Water Hoses2 x Keys1 x USB Flash Drive (with Software)1 x Instruction ManualCertifications:FDA CompliantCE CertificationISO9001 Quality Certification

Price: 5500 USD

Location: Manzanita, Oregon

End Time: 2024-10-19T02:06:22.000Z

Shipping Cost: N/A USD