Description: Product parameters: Size: 24*15.5*28cm(9.44*6.1*11.02inch) Net Weight:3.3kg(7.28lb) Gross weight: 3.7 kg Capacity: 2 watches Package Dimensions (L*W*H): 33.5*29*18cm Main Material: Aluminum alloy + stainless steel Maximum Test Height: 72mm Maximum Test Width: 65mm External Pressure Interface: 6N Pressure Test Range:0.1-6kg(about 0.6Mpa) Cylinder Maximum Pressure: 10Kg (about 1Mpa) Cylinder External Diameter: 80mm Cylinder Inside Diameter: 65mm Cylinder Height: 138mmWatch Waterproof Tester Watch Waterproof Tester Tool W/ Pump Handle & 2 Watches Product parameters:Size: 24*15.5*28cm(9.44*6.1*11.02inch)Net Weight:3.3kg(7.28lb)Gross weight: 3.7 kgCapacity: 2 watchesPackage Dimensions (L*W*H): 33.5*29*18cmMain Material: Aluminum alloy + stainless steelMaximum Test Height: 72mmMaximum Test Width: 65mmExternal Pressure Interface: 6NPressure Test Range:0.1-6kg(about 0.6Mpa)Cylinder Maximum Pressure: 10Kg (about 1Mpa)Cylinder External Diameter: 80mmCylinder Inside Diameter: 65mmCylinder Height: 138mm product features:1、This watch waterproof tester is used for testing the waterproofness of watch cases.2、By exerting pressure to sealed cylinder, underwater status of tens ofmeters can be simulated.3、Pressure differential (inside and out) of test watches will appear after cylinder is decompressed. 4、By observing through transparent cylinder, small bubbles can be visually observed from leakage positions if watches are of weak waterproofness. (Two watches can be tested at one time.) Instructions: 1. Pull out the watch stick as much as possible; 2. Loosen the two screws and take out the cover; 3. Put water into the designated red line of the bucket; 4. Hang the watch on the hanging pole; 5. Install the cover and tighten the screws; 6. Shake the pressure lever to make the air pressure reach 3 air pressure (the official standard of Swiss watch industry), wait for three minutes, let the air enter the entire watch; 7. Depress the hanging watch lever, immerse the watch in water, press the exhaust button to let the air out; 8. When the pressure drops, observe whether there are bubbles in the watch. If there are bubbles, the seal of the watch is not good. Quickly pull the hanging pole and take out the watch. No bubbles appear, and the watch is very tight. packing list:Water test host*1pump handle*1,spare seal ring*2pump handle tightening screw wrench*1PaymentDelivery detailsTerms of salesAbout usContact usPayment We accept ebay payment 。Fees such as import duties, taxes are not included in the item price or shipping costs. These charges are the buyer's responsibility.Delivery detailsShipping: 2-9 working days to: USA Terms of sales We maintain high standards of excellence and strive for hundred percent customer satisfaction. Feedback is very important to us. We hope that you contact us immediately before you give neutral or negative feedback, so that we can address your concerns. It is impossible to address issues if we do not know about them! About usYour satisfaction is our ultimate goal. We work hard to earn your trust and future business. Our certified technicians have tested each item before shipping. The unit comes with 1 year limited warranty on all manufacturing defects.a) If you receive a defective item, you may return it or ask for a discount. Please contact us within 14 days after you receive the package.b) What you returned must be intact and in its original packaging as re? u. Customer is responsible for shipping costs of the returned item.c) We will cover the cost of shipping back t with the shipping rate indicated in the registration page. We will send you a new unit or refund the full payment you paid.Thank you.Contact usBusiness Hour Business Hour: Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time)Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday.Please contact us with ebay message.Please feel free to contact us if you have any questions. Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time)Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday.Please contact us with ebay message.Please feel free to contact us if you have any questions.On Oct 25, 2024 at 05:13:55 PDT, seller added the following information:
Price: 54.29 USD
Location: Monroe Township, New Jersey
End Time: 2024-11-17T07:57:55.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Seller
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money back or replacement (buyer's choice)
Brand: Unbranded
Country/Region of Manufacture: Unknown
Type of Tool: N/A
MPN: N/A
Model: N/A
Main Material: Aluminum alloy + stainless steel
Maximum Test Height: 72mm
Maximum Test Width: 65mm
External Pressure Interface: 6N
Pressure Test Range: 0.1-6kg(about 0.6Mpa)
Cylinder Maximum Pressure: 10Kg (about 1Mpa)
Cylinder External Diameter: 80mm
Cylinder Inside Diameter: 65mm
Cylinder Height: 138mm