Wavlink Wireless Indoor Outdoor Router WIFI Extender Long Range Dual Band Router

Description: Wavlink AC600 7dBi High Power Outdoor Omni-directional Access Point/CPE/Repeater/WISP 2.4GHz 150Mbps + 5GHz 433Mbps, Passive PoE Model Features: Resilient Outdoor Performance: The 570HA1 outdoor wifi extender features an IP65 rated weatherproof enclosure designed to withstand extreme cold, heat and constant humidity in challenging outdoor environments. It can withstand a wide range of humidity and temperature variations from -30°C to 70°C (-22°F to 158°F). In addition, it is equipped with 15KV ESD and 4KV lightning protection to ensure a stable and secure connection even under the harshest outdoor conditions Dual Band Outdoor WiFi Extender Long Range: This outdoor WiFi access point uses 802.11AC Wi-Fi technology and supports 100Mbps on the WAN port, improving existing wireless coverage with speeds of up to 433Mbps on the 5GHz band and 150Mbps on the 2.4GHz band. Note: All Wi-Fi extenders are designed to increase or improve Wi-Fi coverage, not to directly increase speed. In some cases improving signal reliability can affect overall throughput Support POE Power Supply: By combing your power and data connection into a single cable, PoE simplifies the setup of the High power Outdoor WiFi Access Point/Bridge. Combining power and network access into a single RJ-45 connection for the WN570HA1 allow you to install the WN570HA1 in hard to reach location without worrying about running both power and Ethernet cables Multiple Modes, Flexible Use: It supports wireless Repeater, Router, and Access Point (AP) mode. You can switch between these 3 modes to meet your different needs and apply to more outdoor connection scenarios. Router/AP Mode is ideal for converting wired connections into wireless networks. Note: Select the wireless network with a signal strength greater than 70% to get the most reliable connection. The outdoor antenna should be installed at a height of 2 meters above the roof or in a high open place for better reception Built-in High Power Amplifier: With up to 600mW of power and an enhanced receiver design that increases transmission power by 5X. Compared with ordinary outdoor extenders, it has stronger penetration and wider coverage, ideal for farms and camping in the wilderness Reliable Support, Every Step of the Way: Please feel free to contact us in the buyer communication if you have any question Wavlink Brings Technology to LifeWN570HA1 is designed to provide WISP, CPE solutions and long-range wireless network solution for video surveillance and transmission. With two omni-directional 7dBi dual-polarized antennas and strong transmit power of up to 1000mW, it provides a compelling performance solution for small and growing business at a very affordable price and also provides an efficient way to pick up and maintain a stable signal for a wireless network connection from long distance. Withstand harsh climatesWN570HA1 has an IP65-rated weatherproof housing that ensures continued operation on harsh outdoor environments or in climates of extreme cold, heat or continuous moisture. Note: The PoE part of the router is not waterproof. Easy Installation With Power over Ethernet(PoE)By combing your power and data connection into a single cable, PoE simplifies the setup of the High power Outdoor WiFi Access Point/Bridge. Combining power and network access into a single RJ-45 connection for the WN570HA1 allow you to install the WN570HA1 in hard to reach location without worrying about running both power and Ethernet cables. Specifications:1.Operating Temperature: -30°C~70°C(-22 ~158F)2.Storage Temperature: -40°C~70°C(-40~158F)3.Power Plug: UK/EU/US/China/Australia(Option)4.Voltage: 100-240V5.Support 2.4 GHz 5GHz6.Standard:802.11 ac/a/b/g/n7.Maximum WLAN security with WPA2,WPA and WEP(128/64)8.Distance:Outdoor 5000m(Change with the Actual Environment) What’s in the package?1 x WiFi AP/Router2 x Antenna1 x power Adapter1 x POE Converter1 x RJ-45 Networking Cable1 x Main body holder1 x Screw fitting2 x Cable ties1 x Quick Installation Guide Note:Select the wireless network with a signal strength greater than 70% to get the most reliable connection.The outdoor antenna should be installed at a height of 2 meters above the roof or in a high open place for better reception How Does It Work? 1.Slide the straps through the slots on the back of the AP/Router and tighten the straps around the hole.2.Connect one end of an LAN cable to the PoE port of the provided Power injector and the other end of the LAN cable to the LAN port of the AP/Router.3.Use another LAN cable to connect the LAN port of the power supply.4.Plug the power adapter into a wall socket.

Price: 40 USD

Location: Los Angeles, California

End Time: 2024-10-23T03:10:14.000Z

Shipping Cost: 0 USD