Yamaha YP-D9 Direct Drive Turntable Record Player Audio Confirmed Operation 1974

Description: DescriptionYAMAHA YP-D9 This record player has almost the same configuration as the YP-D10 except for the elimination of the silent ending mechanism and the pitch controller.The drive unit uses a direct drive system with a DC motor having a starting torque of 1.2 kg-cm.The servo mechanism uses Ultra Detector and FG (frequency generator) servo circuits with accurate rotational speed detection power, and a quartz PLL servo circuit is also introduced to improve the rotational accuracy of the turntable.The turntable uses a precision dynamically balanced 31.5cm diameter die-cast aluminum turntable. The turntable has a high mass of inertia of 360 kg/cm2 due to the mass being concentrated on the outer circumference, and accuracy is maintained even with transient load fluctuations at high frequencies where the PLL servo is ineffective.The power supply section is powerful enough to draw a large current of 1000mA and maintain a constant voltage of 24V.In addition, the power supply section is triple-shielded, and attention is also paid to anti-vibration measures for the transformer to improve the signal-to-noise ratio.The tone arm is a gimbal support system with a pivot made of polished chrome molybdenum steel, and an S-shaped pipe arm made of a special aluminum alloy with horizontal and vertical initial movement sensitivity of 3 mg or less is used. The head shell is also made of die-cast special aluminum alloy for sufficient strength and light weight.In addition, a 6mm stroke arm height adjusting mechanism is used to accommodate a variety of cartridges.The inside force canceller is highly accurate with a roller string counterweight system.A NEGLEX low-impedance cable with 0.71Ω resistance is used from the cartridge to the pin plug, which is gold-plated to prevent contact failure.The cabinet is a 64mm-thick solid type with high-density particleboard lamination to suppress internal and external vibrations. The arm stand and arm base are made of 1kg zinc die-cast.Double damping system is used for the insulator.The finish is made of Solomon Wall with vertical grain vinyl chloride veneer. All my products are 100% Authentic.Please feel free to contact us if you have any question. Shipping We ship using FedEx, DHL and Japan Post. PaymentWe usually ship within 5〜10 business days of receiving cleared payment. International Buyers - Please Note: Import duties, taxes and charges are not included in the item price or shipping charges.These charges are the buyer’s responsibility.Please check with your country’s customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight (shipping) company or when you pick the item up do not confuse them for additional shipping charges. I do not mark merchandise values below value or mark items as "gifts" - US and International government regulations prohibit such behavior.

Price: 522 USD

Location: gunma

End Time: 2024-08-22T10:11:36.000Z

Shipping Cost: 0 USD